Blackmagic Design VIDEO ASSIST 5" 12G for rent in Saint-Petersburg
- Panel Type TFT LCD
- Display Size 5.0" / 12.7 cm
- Resolution 1920 x 1080
- Aspect Ratio 16:9
- Touchscreen Yes
- Maximum Brightness 2500 cd/m2
- HDR Compatibility Advanced HDR ...
- Panel Type TFT LCD
- Display Size 5.0" / 12.7 cm
- Resolution 1920 x 1080
- Aspect Ratio 16:9
- Touchscreen Yes
- Maximum Brightness 2500 cd/m2
- HDR Compatibility Advanced HDR
- Pixels Per Inch (ppi) 440 ppi
- Image Controls Histogram, Picture-in-Picture, RGB Parade, Vectorscope, Wavefor
-
6 hours
980 i
half shift
-
1 shift
1400 i
shift
-
3 shift
3780 i
1260 i / shift
-
14 shift
15680 i
1120 i / shift
-
30 shift
29400 i
980 i / shift
Enter a value between 1 and 60
Video switcher
- Color Space
Monitor parameters
- Diagonal
- 5''
- Resolution
- 1920 х 1080
- Viewing Angle
- 135 °
- Brightness
- 2500 cd/m2
- Pixel size
- 441
- Additional functions
- Histogram Waveform Vectorscope RGB Parade
- -
- 10 bit
Power
- Battery
- NP-F
Physical
- Width
- 148 mm
- Height
- 36.5 mm
- Depth
- 90 mm
- Weight (kg)
- 410 g
Add professional monitoring and high-quality recording to virtually any camera with the Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor from Blackmagic Design. It features a bright 5", 1920 x 1080 display with 2500 cd/m² brightness to help you frame and focus your shots, and provides 12G-SDI and HDMI inputs for recording the video output from professional and consumer cameras. You can monitor and record HDR video up to DCI 4K, UHD 4K, 2K, or HD 10-bit 4:2:2 and up to 16 channels of embedded 24-bit 48 kHz audio.
The Video Assist records using a single high-speed UHS-II SD slot to SDHC/XC memory cards. You can also use the USB 3.1 Gen 1 Type-C port to record to an external drive, as well as use it for configuring and upgrading the monitor. Video is recorded using industry-standard Apple ProRes (HQ, 422, LT, or Proxy) and Avid DNxHD and DNxHR codecs.
The monitor's touchscreen interface allows you to adjust settings and access monitoring features such as histogram, waveform, RGB parade, vectorscope, and many more scopes and exposure tools. There is also a tally light on top of the monitor to indicate that it is operating and recording. To power the monitor, a 12V power adapter is included. It also has dual battery slots on the rear to power the monitor using separately available Sony L-series type batteries.
When you update the firmware to version 3.3, Blackmagic has introduced USB webcam output, so the monitor can send a full 1080p signal to your computer over USB in a streaming-friendly format. Also added is audio monitoring channel selection.