Insta360 One R Twin for rent in Saint-Petersburg
- Photo Resolution 4K Wide Angle Mod: 4000 x 3000 (4:3) Dual-Lens 360 Mod: 6080 x 3040 (2:1)
- Video Resolution 4K Wide Angle Mod: 4000 x 3000 at 30 fps Dual-Lens 360 Mod: 5760 x 2880 at 30 fps ...
- Photo Resolution 4K Wide Angle Mod: 4000 x 3000 (4:3) Dual-Lens 360 Mod: 6080 x 3040 (2:1)
- Video Resolution 4K Wide Angle Mod: 4000 x 3000 at 30 fps Dual-Lens 360 Mod: 5760 x 2880 at 30 fps
- Aperture 4K Wide Angle Mod: f/2.8 Dual-Lens 360 Mod: f/2.0
- Battery Base: USB Type-C 1190 mAh
-
6 hours
1120 i
half shift
-
1 shift
1600 i
shift
-
3 shift
4320 i
1440 i / shift
-
14 shift
17920 i
1280 i / shift
-
30 shift
33600 i
1120 i / shift
Enter a value between 1 and 60
Sensor
- Sensor type
- 1''
Photo Specs
- Max Resolution
- 6080x3040 pix
- Bit Depth
- 100 bit
Video Specs
- Recording Formats
- MPEG-4 H.264
- Resolution
- 5760x2880 pix
Storage
- Memory Card Type
- micro SD
Power
- Battery
- Type-C
Physical
- Width
- 72 mm
- Height
- 43 mm
- Depth
- 48 mm
- Weight (kg)
- 131 g
The Insta360 ONE R Twin Edition is one of the key configurations of the modular ONE R action camera system. The Twin Edition includes the Core module, 4K Wide Angle Mod, Dual-Lens 360 Mod, and the necessary Battery Base that holds the modules together. The Core module, which is the brain, and any other module of your choice, mount side by side on the Battery Base. The different modules can be swapped in interchangeably next to the Core module. A 1" Wide Angle Mod, which captures 5.3K resolution video, is also available, sold separately, and can be swapped in. The ONE R allows you to approach different applications with one system.
The Battery Base has electronic contacts that connect two modules to work together as one. Also included is a mounting frame with a standard 3-prong action cam mount. The entire setup fits into the frame in a compact form. This way it can be attached to various support accessories, including dedicated ones that were designed specifically for this ONE R system. The ONE R system is designed to be waterproof without any waterproof housing required. But it first has to be installed in the Mounting Frame. With the Core module and either of the other included modules attached to the Battery Base and then installed in the Mounting Frame, the system can be used in up to 16' underwater.