Rent NextoDI NSB-25 in Moscow
- Modular Memory Card Backup System
- Designed to customize various memory card modules
- SxS/ XQD/ P2/ REDMAG/ AJA PAK/ CFast/ 2.5" SSD (or 2.5" HDD) ...
- Modular Memory Card Backup System
- Designed to customize various memory card modules
- SxS/ XQD/ P2/ REDMAG/ AJA PAK/ CFast/ 2.5" SSD (or 2.5" HDD)
- AXSM/ Express P2/ RED MINI-MAG
- Playback 2K, Preview 4K
- Simultaneously Backup up to THREE drives with a single operation (MCopy)
- Log File
-
1 shift
1200 i
shift
-
3 shift
3240 i
1080i / shift
-
14 shift
12600 i
900i / shift
-
30 shift
25200 i
840i / shift
-
6 hours
840 i
half shift
Enter a value between 1 and 60
Monitor parameters
- Diagonal
- 5''
- Resolution
- 800х480
- Sensor type
- a-Si TFT
Power
- Power Requirement
- External power supply
Input and Output
- Audio
- Jack 3.5
- DATA
- USB 3.0
Physical
- Width
- 176 mm
- Length
- 96 mm
- Height
- 103 mm
- Weight (kg)
- 1.5 kg
NextoDI NSB-25 is a modular device for backing up data from memory cards used in professional tapeless cameras. Read and play from SxS PRO, SXS PRO +, SXS-1, P2, P2E, express P2, CFast, XQP, AXSM, REDMAG, 2.5 ”SSD, 2.5” HDD, AJA Quad, CF, SDHC / SDXC. Ability to create backup copies of material simultaneously on three media. 2K output (via HDMI) and 4K viewing (on the built-in display).
Removable memory card reader
Nexto NSB-25 is an extensible data backup solution, the functional flexibility of which allows you to work with almost any memory card. Optional modules support SxS, XQD, AXSM, P2, express P2, AJA QUAD, CFast, REDMAG and 2.5 ″ SSD media. Nexto NSB-25 has two fixed slots: one for CompactFlash (CF) cards, the other for SD (Secure Digital) cards
- SxS PRO/SxS PRO + /SxS-1
- P2/P2E/express P2
- CFast
- Xqd
- Axsm
- Redmag
- 2.5″ SSD/2.5″ HDD
- AJA Quad
- CF
- SDHC/SDXC
- 2K signal output, view 4K clips
The Nexto NSB-25 is capable of outputting 2K video signals via HDMI outputs and view 4K video clips on its own 5-inch color TFTLCD display. To view the footage in the best quality, just connect the device to an HDMI-TV or monitor.
Simultaneous backup to three media in one operation (MCopy)
Creating three copies when installing two internal storage modules and connecting one external USB3.0 drive (or RAID system).
After shooting, remove the memory card from the camera and insert it into the appropriate slot on the Nexto NSB-25. Thus, you can easily create and reliably save up to three backup copies of the footage at the same time (when installing two storage modules and connecting one external drive).
Making copies on set without the need for a laptop
Copying material from the internal storage module to the second HDD module or external USB3.0 drive.
Operation log
Nexto NSB-25 generates a log file (with CRC protection) to track user activity and saves it to each mapped drive. The magazine provides information about copying (Xcopy), synchronization (Sync), connecting to a computer, and other actions.
Copy files larger than 4 GB
Support for exFAT, FAT32, UDF, and HFS + file systems.
Incremental backup
The Nexto NSB-25 supports incremental backups. This method allows you to copy only the data that was changed the last time. Thanks to this feature, copying is faster, and disk space is greatly saved.
Two removable storage modules (Bridge Pellet)
Nexto NSB-25 comes with two removable storage modules (no drives). Modules are easily replaced by other similar ones, allowing you to expand the storage space for backups unlimitedly. The user only has to select the HDD- or SSD-drives of the required size and speed, install them in the device and start copying from memory cards.
2K Playback: MPEG2 (up to 50 Mbps), AVCHD, H.264, PRORES, DNxHD
2K view: AVC-Intra, XAVC
4K viewing: Cinema DNG (the feature will be available when updating the firmware)
4K Pack
This feature allows you to convert 4K material to H.264 (.mov) files, which enables playback of transcoded clips on the built-in 5-inch TFT color LCD display or a large external HDMI monitor.
Copy all files to an external drive (Sync)
You can easily copy all the files available on the internal HDD module to an external drive. In this case, only those files that have been changed or added since the last backup session will be copied. This way, copying is faster and disk space is greatly saved.
Export folders
You can select multiple folders and move them from the internal storage to the external drive and vice versa. At the same time, the selected folders must be present on both disks.
Display previous backup status
Nexto NSB-25 has the function of automatically turning off the power when inactive upon completion of the XCopy, MCopy and Verify processes. The next time you turn on the device, the screen displays information about the status of the last backup: “Success” (successful) or “Failed” (unsuccessful). You can clarify the details of the operation in the log file of each individual disk.
Naming drives and folders
When performing a backup from a memory card, the corresponding folders on the disks are created automatically. The folder name reflects the creation time of the most recent file, for example, 20140401.000. Folders are numbered according to the order in which they were copied. For the convenience of using the device by several users, Nexto NSB-25 does not change the name of the disk when formatting it. To identify disks, you can give them names on the computer.
Connecting to a computer via USB3.0
Nexto NSB-25 connects to a computer via a fast USB 3.0 interface. Thus, you can view, edit and dump the footage from the internal storage modules to your computer. Removable storage modules also have a USB 3.0 port.
-
Инструкция пользователя PDF, 2336 KbСкачать -
Go to the manufacturers website