Rent Sachtler System 30 EFP 2 MCF in Moscow
- Load Capacity 77.2 lbs (35.0 kg)
- Maximum Height 70.6" (179.3 cm)
- Maximum Height w/o Column Extended N/A
- Minimum Height 29.3" (74.4 cm) ...
- Load Capacity 77.2 lbs (35.0 kg)
- Maximum Height 70.6" (179.3 cm)
- Maximum Height w/o Column Extended N/A
- Minimum Height 29.3" (74.4 cm)
- Folded Length 37.5" (95.3 cm)
- Leveling Bubble/Illuminated
- Counter Balance System 18-Step plus boost
- Balance Plate Yes, with 150mm of travel
- Tilt Drag 7-Step plus zero
- Tilt Range -75 to +90°
- Head Attachment Fitting 150mm
- Leg Stages/Sections 1/2
- Leg Lock Type Rapid-Action Clamps
-
1 shift
6000 i
shift
-
3 shift
16200 i
5400i / shift
-
14 shift
63000 i
4500i / shift
-
30 shift
126000 i
4200i / shift
-
6 hours
4200 i
half shift
Enter a value between 1 and 60
Tripod
- Tripod load
- 95 kg
- Bowl
- 150 mm
- Maximum tripod height
- 1.73 cm
- Head load
- 35 kg
- Minimum tripod height
- 0.77 cm
- Counterbalance
- да
- Tripod material
- carbon
Physical
- Length
- 0.76 m
- Weight (kg)
- 12.2 kg
The Sachtler System 30 EFP 2 MCF consists of the Cine 30 HD 150mm fluid head, EFP 2 CF tripod, mid-level spreader, telescoping pan arm, 3060 side-load camera plate, and the rubber feet 100/150 (set of three).
Any long-suffering camera assistant will appreciate the Cine 30 HD 150mm fluid head and its unique side-load sliding camera plate. With the camera fully equipped, mounting and dismounting using the Snap & Go locking mechanism is safe, efficient, and worry-free. It is fully compatible with Arri and OConnor camera plates, and features a fine adjustment for a tight, secure fit even if the plate is worn from use. Counterbalance is accomplished with an 18-step selector dial and a high/low range lever for rapid, yet fine-tuned, repeatable setups. Horizontal and vertical drag is governed by a similar 7-step (plus zero) indexed selector system in conjunction with Sachtler's patented leak-proof frictionless cartridges, which carry a separate 5-year warranty. A tilt safety lock guarantees the integrity of the payload until it is secured, and caliper disk brakes ensure reliable pan and tilt fixing during operation with a quick flip of a short-throw lever.
The EFP 2 CF one-stage tripod features a die-cast 150mm receiver, dual 22.0mm carbon fiber composite leg tubes, and rapid-action clamps for fast, secure setups. Stronger than steel and lighter than aluminum, carbon fiber composites have the added advantage of absorbing vibration- a particularly useful trait with HD cameras. Used in conjunction with the included 7007 mid-level spreader and the rubber feet, payload integrity is assured regardless of terrain.
