Rent CFixer Compass degausser in Moscow
- Compass degausser
- 100% degauss DJI drone compass.
- Tested on all of DJI drones
- Housing: plastic;
- Voltage supply: 12 to 26 volts D.C.
- Consumption current: no more than 3A.
- Compass degausser
- 100% degauss DJI drone compass.
- Tested on all of DJI drones
- Housing: plastic;
- Voltage supply: 12 to 26 volts D.C.
- Consumption current: no more than 3A.
-
1 shift
300 i
shift
-
3 shift
810 i
270i / shift
-
14 shift
3150 i
225i / shift
-
30 shift
6300 i
210i / shift
-
6 hours
210 i
half shift
Enter a value between 1 and 60
Power
- Power Requirement
Physical
- Width
- 55 mm
- Length
- 95 mm
- Height
- 15 mm
- Weight (kg)
- 130 g
The most common malfunctions of the DJI multicopter compass are: Camera roll level issue (on the Roll-axis) when rotates along the YAW. Frequently emerging “Compass error” sign. Toilet around the hover point. In most cases these malfunctions are caused by excessive compass magnetization, which can be easily fixed with CFixer.
CFixer is designed to restore the electric compass of DJI copters to the factory defaults. The working principle aims to making an impact to the compass IC with electromagnetic field, time altered using a special algorithm. CFixer is powered from standard DJI Power Supply through the connector, which is used for charging RC remote controller of the following quadcopters:
— DJI Phantom 3 adv/pro/4k;
— Phantom 4, 4 adv/pro and Plus versions;
Power supply of the following quadcopters - DJI Phantom 3 Sta / SE, Mavic and Spark – are not designed for CFixer usage. Owners of these multicopters shall use power adapter from their power supply to CFixer (must be purchased separately). Owners of following multicopters – DJI S900, S1000, Matrice with DJI A2 and A3 controllers, as well as owners of multicopters from other manufacturers, in order to power up CFixer, shall use HP laptop charger with the connector DC7.4x5.0, with output voltage 19V and current power of no less than 3A.
-
инструкцияСкачать -
Go to the manufacturers website