SWIT S-2240 for rent in Saint-Petersburg
- Lamp Type 60 x SMD LEDs
- Mount Type 1/4"-20 screw
- Cold-shoe mount
- Photometrics 300 lux at 3.3' (1 m)
- Beam Angle 120° Half-declined at 68° ...
- Lamp Type 60 x SMD LEDs
- Mount Type 1/4"-20 screw
- Cold-shoe mount
- Photometrics 300 lux at 3.3' (1 m)
- Beam Angle 120° Half-declined at 68°
- Color Temperature 3200 ± 200K to 5600 ± 300K
- Rating CRI Ra ≥93 TLCI ≥97
- LED Lifetime 50,000 hours
- Power Source 6 to 17 VDC
- Power Consumption Approximately 12 W
- Power Connector D-Tap
-
6 hours
280 i
half shift
-
1 shift
400 i
shift
-
3 shift
1080 i
360 i / shift
-
14 shift
4480 i
320 i / shift
-
30 shift
8400 i
280 i / shift
Enter a value between 1 and 60
Specification
- Type
- LED lamp
- Power
- 12 W
- Color temperature
- 3200 - 5600 K
- Number of LEDs
- 60 шт.
- Beam Angle
- 120 degrees
- Color temperature controller
- да
- Illumination
- 300 lux
Physical
- Width
- 143 mm
- Height
- 91 mm
- Depth
- 34 mm
- Weight (kg)
- 166 g
The S-2240 Bi-Color On-Camera LED Light from SWIT features 60 ultra-bright, surface mounted LEDs. It comes with a polycarbonate diffuser that attaches on the front of light fixture via magnets. The diffuser helps generate an equally spread, glareless light for close interview and professional film lighting. This LED light offers a 120° wide beam angle with a half-declined beam at 68°, an illumination of 300 lux at 3.3', and a CRI rating of 92. The light output can be adjusted from 10 to 100% with the onboard dimmer. The color temperature can also be continuously adjusted from 5600 to 3200K via the knob on the rear panel.
The LED light comes with an interchangeable snap-on Sony NP-F type battery plate that accepts Sony NP-F970 and NP-F770 batteries, and SWIT S-8972, S-8970, and S-8770 batteries. It operates on 6 to 17 VDC wide voltage input, which can be supplied from 7.2V camera batteries. It can also accept power from D-Tap power output sockets, such as 14.4V V-mount or Gold mount batteries, battery plates, or camera handles using the included D-Tap cable. The light can be mounted on a tripod via a 1/4"-20 screw head, and can be fixed on the camera with the cold-shoe mount ball head.
